Ultracom R10/R10i firmware version and update instructions

Ultracom R10/R10i firmware version: B6.E
Date: 11.22.2022
Update content:
  • Fix to total bark amount.
  • Fix to tracking interval.
  • Fix to indicating battery level.
  • Other minor changes and improvements.


Note! The device SIM-card must be active and the device must be connected to the mobile network.


Update instructions on Ultracom Next or Tracker app:

  1. Install a charged battery to the device. Note the (+) and (-) markings on the battery and the battery casing.
  2. Wait that the green LED-light on the device starts to blink once per second. If the device finds satellites, the light will blink once per three seconds.
  3. Open the Ultracom Next or Tracker app and open the main menu. 
  4. Select "devices" and select your R10 device.
  5. Select "Firmware update" and read more instructions from the screen. 
  6. The device will receive the command and start the firmware update.
  7. When the update is complete, the device will continue to send the location.